Can You Manually fill An Automatic Whirlpool Washing Machine? (The Answer)

There is a good reason you may be wondering if you Can manually pour water into an automatic Whirlpool washing machine.

Your water supply line does not flow constantly or it usually flows at drastically low pressure.

This can be stressful at times since you will always have to wait long hours to get your water filled to the right water level.

So you’ve probably thought about simply pouring water from a bucket into your washer to run.

Yes, you can manually fill water into your top load and front load automatic whirlpool washing machines if you don’t have a direct water supply to your whirlpool washing machine.

For your Top load whirlpool washing machine, you can fill in water manually using a bucket by simply removing the top lid and pouring the water. Automatic whirlpool washing machines have sensors that are able to detect when the optimum water level is reached.

You can fill your front load washing machine through the detergent dispenser tray. This is however a little slow process and you need to monitor carefully the water levels.

In this article, we will provide a detailed guide on how you can manually fill water into your whirlpool washing machine.

How does an automatic washing machine work?

In order for you to fully understand whether your automatic whirlpool washing machine can be used manually, it’s important you understand how an automatic washing machine is designed to operate.

An automatic whirlpool washing machine has two inlets for hot and cold water supply.

You’ll usually connect only to the cold water inlet.

Once you load your clothes into the drum, a sensor in your washer turns on the tap which allows water to flow into your washer through the detergent dispenser where it washes the detergent into the drum.

A sensor is triggered in the washer which stops the inflow of water into the tap when optimum water has entered the tub.

The washer starts washing after which the water is drained, refilled with water, rinsed, and goes through the spinning cycle.

All these processes are automatic. Hence called, an automatic whirlpool washing machine.

Read also: Where to put detergent in a whirlpool washing machine (Explained)

What to do if your automatic Whirlpool washer water supply isn’t working

In the paragraph above, we looked at how a typical whirlpool automatic washing machine works.

When your automatic washing machine is unable to have water flow in through the inlet to begin the cycle, an error occurs.

And your wash cycle will not begin.

So what do you do?

You can manually pour water into your washer by simply lifting the top lid and pouring the water if you use a top-load automatic washing machine.

For a front load washing machine, you can fill in water through the detergent dispenser.

NB: because you fill in water manually you need to keep an eye on the water level indicator to make sure you are filling in the right amount of water.

Now that the machine is filled with water, you can proceed with your laundry as usual.

Just be sure to check the water level occasionally to make sure that the machine doesn’t run out of water during the cycle.

Also read: Do washing machines always have water in them? (Answered)

What happens if I put water manually in an automatic washing machine?

You probably won’t go buying an automatic washing machine only to come and do part of its work manually.

But yes, it happens sometimes.

You may need to manually fill your washer if you have a cut in your water supply or another issue.

You may be wondering if it is safe to manually fill your automatic washer or if something unexpected may happen.

Well, here is the answer:

Your automatic washing machine will work perfectly when you manually fill it with water except that you need to monitor it closely to make sure the correct water level is always maintained.

So don’t worry, your fully automatic washing machine will work even if you pour water from a bucket.

How do I put water manually in an automatic whirlpool washing machine?

Now that we have explained that you can manually fill in water into your whirlpool washing machine without any problems when done well, let’s see how you can manually fill in the water.

It’s a simple process that doesn’t require any special expertise and you can do it all by yourself.

Here is how to manually fill your automatic whirlpool washing machine:|

Step 1: Select your preferred wash cycle from your washer’s control panel.

Step 2: Add your detergent and fabric softener into the washer.

Step 3: Load your laundry into the drum and close the lid

Step 4: Start the washer and let it run for 20 seconds, then pause.

Step 5: Now open the top lid, add water, and start the cycle.

Your washer should start. But if it doesn’t start in 20 seconds, chances are that the water is below what is required. Add more water and your washer should start.

Step 6: Repeat these steps after the cycle is completed to start the rinse cycle.

Read also: What is “washing machine air dry”? (Explained for beginners)

Tip: If you use a front-load automatic washing machine, open the detergent dispenser and gently pour water to fill your washer, whiles keeping the front door tightly closed.

How does an automatic washing machine choose the water level?

There are many factors that go into deciding how much water to use for each load of laundry. Let’s take a closer look at some of these factors.

1. The type of fabric is one of the most important factors in choosing the water level. For example, delicate fabrics like silk or lace will need much less water than heavier fabrics like denim or towels. The washing machine will take this into account when choosing the water level.

2. Another factor is the size of the load. A small load will obviously need less water than a large load. The washing machine will take this into account as well.

3. Finally, the water temperature also plays a role in choosing the water level. Hot water will need less water than cold water because hot water is more effective at removing dirt and stains.

All of these factors are taken into account by the washing machine’s computer when it chooses the water level.

Read also: Accidentally turned off washing machine? (What to know)

Can you still wash your clothes in an automatic Whirlpool washing machine without power?

Your automatic whirlpool washing machine can’t run without power.

So when there’s a power outage, you will need to wait till you have a power supply to do your laundry.

Automatic Whirlpool washing machines have been designed to be easy to use and efficient.

However, there are times when the regular water supply line is not working or flowing at low pressure.

In this case, you can manually add water to your machine using a bucket as described in this article.

Always be careful to add the right amount of water so that your machine does not run into an error and stop the cycle.

Sources:

Water level- whirlpool