One of the most important components of a Hotpoint washing machine top loader is the filter.
In fact, most people are familiar with the Hotpoint washing machine filter even if they don’t know what it is called.
The Hotpoint washing machine filter is a cylindrical piece of plastic that sits on top of the agitator or at the bottom of your washer and catches lint and other debris as the water and clothes pass through it.
The purpose of the Hotpoint washing machine filter is to keep the agitator and pump free of debris and maintain optimal washing conditions.
All Hotpoint washers have a filter, and the location of the filter may be slightly different depending on the model of your Hotpoint washer.
In most cases, the filter can be found behind the agitator or near the bottom of the washer tub. But you always need to check your manufacturer’s manual for the exact location of your model.
In this article, we are going to equip you with all the necessary knowledge about the Hotpoint Washing machine filter top loader.
So let’s dive in!
Table of Contents
What is a Hotpoint washing machine top load filter and what does it do?
A Hotpoint washing machine top load filter is a plastic component that sits at the top of your washing machine or near the bottom right corner and catches any debris or dirt that may be in the water before it enters the machine.
This helps to keep your washing machine clean and running smoothly.
The filter is an important part of your washing machine and should be maintained on a regular basis.
If the filter doesn’t work efficiently, it will cause your machine pump to get clogged, and may even damage the machine.
How does a Hotpoint washing machine filter top loader work?
Most top-loading washing machines have a filter that is located on the washer.
This filter is used to trap lint and other small particles that can clog the system.
The filter is made of mesh or paper, and it is usually located near the agitator or at the bottom of your Hotpoint washer.
If your Hotpoint washing machine does not have a filter, or if you are unsure of where the filter is located, you can consult the owner’s manual.
The manual will have information on how to locate and clean the filter.
Does a Hotpoint washer have a filter?
Yes, a Hotpoint washer has a filter.
In fact, nearly all washing machines have filters these days.
The purpose of the filter is to remove lint and other debris from the water before it enters the machine.
This helps to keep the machine running smoothly and prevents any clogs or damage.
Where is the filter located on a Hotpoint washing machine?
It is good to know your Hotpoint top load washer filter location.
Most Hotpoint top loader washers have a filter located somewhere on the machine.
Where the filter is specifically located on a Hotpoint top loader washer can vary depending on the model.
For an agitator-type washer, the Hotpoint top loading washing machine lint filter is located inside the center agitator.
This is where you will find a lint trap that needs to be cleaned regularly in order to ensure the optimal performance of the machine.
The Hotpoint top loading washing machine inlet filter is also located at the end of the drainage hose.
A small mesh screen is fitted onto the end of the hose in order to catch any lint or debris that may be present.
For an impeller-type washer, the Hotpoint top loading washing machine filter is located at the bottom front or back of your washer. which can be easily accessed by unscrewing it with your hand.
How do I get the filter out of my Hotpoint washer top loader?
Your Hotpoint washing machine filter helps keep your clothes clean and free of debris.
If you need to remove the filter for any reason, it shouldn’t be so difficult.
Let’s see how we can get the filter out:
Locate the filter. It is usually located on the side, front, or back of the washing machine, near the bottom. There may be a small panel that you need to remove in order to access it.
After you have found the filter, unscrew it from the housing. You may need a wrench or pliers to do this. Be careful not to lose the O-ring that is attached to the filter. This is what seals the connection and prevents leaks.
Once the filter is removed, you can clean it with warm water and soap. Rinse it well and then screw it back into place. Make sure that the O-ring is in place and that it is seated properly.
How to replace/change the Hotpoint washing machine filter top loader
Replacing the Hotpoint washing machine filter top loader is a task that can be easily done by following these simple steps.
Locate the filter. The filter is usually located near the top of the washing machine, on the back or side.
Remove the old filter. To do this, simply unscrew it or release it from its housing.
After that, insert the new filter. Make sure that it is inserted correctly and that it is screwed in or secured properly.
Finally, turn on the washing machine and test it out.
Replacing the Hotpoint washing machine filter top loader is a quick and easy task that can be done in just a few minutes.
How do you clean the filter on a Hotpoint top load washer?
The Hotpoint washing machine filter top loader is designed to keep your clothes clean and free from debris.
However, over time this filter can become clogged and need to be cleaned.
Here are the steps you need to follow in cleaning the Hotpoint washing machine filter top loader:
Start by unplugging your washing machine from the power outlet.
It is important that your washer isn’t connected to any power source as well as ensure that it’s not in a place where water can get into contact with it.
When removing your filter, water might come out of the opening so make sure to get a rag on the floor near the opening to avoid spillages.
Locate your Hotpoint washing machine filter.
As mentioned already, your Hotpoint washing machine filter can be located at the center of your agitator, or at the bottom depending on your washing machine model. Always check your Hotpoint washing machine filter if you are unsure where to find your filter.
Remove the cover of your Hotpoint washing machine filter top loader.
Once you have located the filter, remove the cover. For most Hotpoint washers you will have to turn the cover counter-clockwise to remove it, or even use a screw or pry to assist you to remove it.
Pull out the filter.
Now that you have removed the cover of your filter, pull out the filter by turning counterclockwise and pulling simultaneously.
You would notice that there is wet lint, detergent, and other tiny materials stuck around your filter.
Next, use a paper towel or a thin towel to clear out the lint deposited on the filter. You can also use a small brush if it proves difficult to remove.
Remove the mesh screen on the filter and soak in warm water for a period of about 10 minutes.
You may not be able to remove the screen depending on your model. But this process will allow you to get rid of all lint that can’t be removed manually with a brush or towel.
Check the filter hole for any debris.
Lower your washer a bit and check to see if there’s any lint debris stuck inside the filter hole and remove all of it.
Fix the filter and cover back into your washer.
Once you are certain that you have cleared your filter system of all lint and debris, fix them back into your washer.
Step 9 (Final step)
Test for leaks before doing your next laundry
Run your washer empty and look out for any leaks on your washer. If you find any, then it means your filter hasn’t been fixed properly and you need to check and adjust it.
How often should Hotpoint washing machine filter top loader be cleaned?
Hotpoint washing machines come with a lint filter to help keep the machine clean.
The lint filter should be cleaned at least once every 6 months or occasionally after every load of laundry in order to maintain optimal performance of the machine. This is according to a recommendation from Hotpoint.
A dirty filter can also be the reason why your Hotpoint washing machine is smelling.
More importantly, if you notice that the machine is not performing as well as it should, it is probably time to clean the filter.
In this article, we covered all the essentials you need to know about your Hotpoint washing machine filter top loader.
From what the filter does, where to locate it, and best practices to keep it functioning at its best.
Feel free to leave your comments below.