One of the most important components of your Samsung washing machine is the filter
It is a key factor in the performance of every washing machine.
Bad odor and water sitting in your washer are one of the consequences of a faulty washing machine.
So if you are wondering whether all Samsung washers have filters, here is the answer:
All Samsung washers have filters that prevent lint and other debris from entering your washing machine or prevent debris from blocking the drainage hose.
Some new high-end washers have a filter in the pump that cleans by itself so you don’t need to do any periodic maintenance. It is not something you have easy access to like the inlet valve or drain filters.
Basically, your Samsung washer contains the inlet valve filter and the drain filters.
Let’s explore in detail!
Table of Contents
How many filters does the Samsung washer have?
Samsung washing machines have two filters- the inlet valve filters and the drain filters.
Both the inlet valve filter and the drain filter protects your washing machine by preventing debris from entering your washer while filling or during your wash cycle.
Regular cleaning of your filters enables the proper functioning of your washing machine and can avoid problems and extra repair costs for your washer.
The inlet valve filter is located at the junction of the inlet valve and the hose at the back of your washing machine.
The drain filter is also located at the bottom part of your washing machine.
How to clean Samsung washing machine water inlet valve filter
Every Samsung washing machine comes with an inlet filter or mesh filter which is placed between the hose and the water inlet sections.
This valve filter prevents dirt, debris, and other particles from entering the washing machine during the intake of water for your wash cycle.
Cleaning of your inlet valve filter is important because when the filter gets heavily clogged it may cause slow water flow into the washing machine and may cause a delay in your laundry.
How then, do you clean your water inlet valve filter?
How to clean the mesh filter on a Samsung washer:
Let’s dive into the steps to clean your water inlet valve filter or mesh filter.
- Step 1
First, before you clean your inlet valve filter, make sure to unplug your washing machine from the power source.
- Step 2
Close or turn off your water supply pipes connecting to your washing machine.
Don’t forget to get a bucket or a towel for any water spillage because the water already in your water hose will spill out after opening.
- Step 3
Locate the hose at the back of your machine, and rotate it anti-clockwise to remove it from the housing of your washing machine.
- Step 4
Disconnect the hose from your washing machine. You will find the filter in the port of the inlet valve. Gently pull out the filter from the inlet valve with a pair of pliers.
- Step 5
Wash the filter with lukewarm water. You can add baking soda or vinegar to your water for a clean wash. Scrub the filter with a brush to remove all the particles and debris from the filter.
- Step 6
After washing your filter, insert it back into the port of your inlet valve.
Just pop it back into the port and reconnect everything.
A clogged inlet valve can burst your water hose due to the pressure that will build up when water is trying to pass through which can cause floods and destroy your stuff.
It can also delay your washing by taking long hours to fill water into your washing machine.
Make sure to clean your water inlet valve at least once every year for smooth wash cycles and to prevent all the inconveniences which come with a clogged inlet valve.
How do I clean the drain pump filter of my Samsung washing machine?
The drain pump filter performs a protective function by preventing lint and other debris from entering your washing machine during your wash cycle.
This drain pump filter can get clogged or choked with lint and debris after using your washer for some time and can get stinky.
A choked drain pump filter can cause slow drainage of your used water or water not draining at all.
To get rid of the stinky smell and to prevent your washing machine from getting clogged you need to regularly clean your drain pump filter.
To clean your drain pump filter you will need:
- A knife or a flathead screwdriver
- A towel
- Tray or bowl.
- Step 1
You need to first locate your drain pump filter which is located at the bottom front of your washing machine.
- Step 2
Make sure to unplug your washing machine from the power source and close your water source.
- Step 3
Put your towel underneath the panel to catch any water that might flow from your washer.
- Step 4
Open the panel with your flathead screwdriver, you will see an emergency hose and the actual pump filter.
- Step 5
Pull the emergency hose and remove the cap on the hose by twisting it. The emergency hose will help you drain any excess water in your drum before opening it.
- Step 6
Drain off the water from the hose into your bowl until it’s empty.
- Step 7
Once you are done, rinse the cap and push it back into the hose, twist it clockwise to tighten it. Put the hose right back over the hook.
- Step 8
Now rotate the drain pump filter anti-clockwise to remove it.
- Step 9
Clean out any debris and rinse the filter under running water. Check inside the housing to remove any debris or particles. Use a paper towel to clean the housing.
- Step 10
After a successful cleaning, reinsert your drain filter back into the housing and tighten it by twisting the cap clockwise.
Where is the debris filter on the Samsung top load washer?
Samsung top load washing machines have debris filters that prevent your washer from getting clogged with dirt and debris and give you a cleaner wash.
Regular cleaning of your debris filter is necessary to prevent your washing machine from getting clogged or choked.
Because the performance of your washer may be affected if the debris filter is all choked up.
You must first locate your debris filter to be able to clean or service it.
And it is effortlessly and super easy to locate.
The debris filter for your Samsung top load washer is located inside your washing machine at the lower back portion.
To clean your debris filter, you should remove the top cover, unscrew the filter cap and wash it to remove all the dirt and particles. You can wash with warm water or you can also add vinegar to your water for a clean wash.
Once you finish washing your debris filter you attach everything back.
What is a Magic filter in Samsung washing machines?
Having lint on your clothes after washing is something that is undesirable and frustrating at times. In fact always.
For better and cleaner clothing, Samsung has introduced the Magic filter.
The Samsung Magic filter is placed low in the washing machine to effectively collect lint and dirt regardless of the water level.
No matter the size of your laundry, the Samsung Magic filter is able to effectively trap lint and dirt in your wash cycle.
Samsung Magic filter enables your washing machine to effectively remove lint and is easier to clean.
Like magic, the Magic filter uses a convenient indicator light that notifies you when it’s time to clean your filter.
The Samsung Magic filter is designed to cater to all laundry sizes so even small loads come out perfectly cleaned and lint-free.
How to clean your Samsung Magic filter
Cleaning your Magic filter is easier than you can think.
It is easier to detach and clean your Magic filter.
Here is the easy steps:
- Locate the lock at the top and firmly pull it towards you to take out the filter.
- Under running water, use a soft brush to wash the filter into and fro strokes.
- Return the filter in the same position you removed it.
- Start your washer to see if everything works perfectly.
To clean your Magic filter you just pull it out and throw away the dried lint and dirt in the filter.
For your Samsung washing machine to work efficiently and effectively, cleaning your filters is important.
It is advisable to clean your Samsung magic filter after each wash.
Make it a routine to clean your filters at least every three months for the proper performance of your washing machine.