Whirlpool Washer Filter Location Top Load (How to locate)
Most people are familiar with the whirlpool washing machine filter even if they don’t know what it is called.
The whirlpool washing machine filter top loader is a cylindrical piece of plastic that sits on top of the agitator or at the bottom of your washer and catches lint and other debris as the water and clothes pass through it.
The purpose of the whirlpool washing machine filter is to keep the agitator and pump free of debris and maintain optimal washing conditions.
All whirlpool washers have a filter, and the location of the filter will vary depending on the model of the washer.
For an agitator-type washer, the Whirlpool top-load washing machine filter is located inside the center agitator.
For an impeller-type washer, the Whirlpool top load washing machine filter is located at the bottom front or back of your washer which can be easily accessed by unscrewing.
In most cases, the filter can be found behind the agitator or near the bottom of the washer tub. But you always need to check your manufacturer’s manual for the exact location of your model.
Table of Contents
What is a whirlpool washing machine filter and what does it do?
A whirlpool washing machine filter is a device that sits at the top of your washing machine or near the bottom right corner and catches any debris or dirt that may be in the water before it enters the machine. This helps to keep your washing machine clean and running smoothly.
The filter is an essential part of your washing machine and should be maintained on a regular basis.
If the filter doesn’t work efficiently, it will cause your machine pump to get clogged, and may even damage the machine.
Read Also: What is a washing machine gasket? (Explained for beginners)
How does a whirlpool washing machine filter top loader work?
Most top-loading washing machines have a filter that is located on the washer. This filter is used to trap lint and other small particles that can clog the system. The filter is made of mesh or paper, and it is usually located near the agitator or at the bottom of your whirlpool washer.
If your washing machine does not have a filter, or if you are unsure of where the filter is located, you can consult the owner’s manual. This manual will have information on how to locate and clean the filter.
Does Whirlpool washer have a filter?
Whirlpool washers have a filter. In fact, nearly all washing machines have filters.
The purpose of the filter is to remove lint and other debris from the water before it enters the machine. This helps to keep the washer running smoothly and prevents any clogs or damage.
Where is the filter located on a whirlpool washer?
Most Whirlpool top loader washers have a filter located somewhere on the machine.
Where the filter is specifically located on a Whirlpool top loader washer can vary depending on the model.
For a whirlpool washer with an agitator, the filter is located inside the center agitator.
This is where you will find a lint trap that needs to be cleaned regularly in order to ensure the optimal performance of the machine. The Whirlpool top-load washing machine filter is also located at the end of the drainage hose. A small mesh screen is fitted onto the end of the hose in order to catch any lint or debris that may be present.
For a Whirlpool washer with an impeller, the filter is located at the bottom front or back of your washer which can be easily accessed by unscrewing.
Whirlpool top load washer lint trap location
The lint trap in a top load whirlpool washer can be located in the center of the agitator beneath the detergent dispenser, or at the bottom rear side of the washer.
How do I get the filter out of my whirlpool washer top loader?
The filter of your whirlpool washing machine helps keep your clothes clean and free of debris. If you need to remove the filter for any reason, it shouldn’t be so difficult.
Let’s see how we can get the filter out:
Step 1 Locate the filter.
It is usually located on the side, front, or back of the washing machine, near the bottom.
There may be a small panel that you need to remove in order to access it.
Step 2 Unscrew it
After you have found the filter, unscrew it from the housing. You may need a wrench or pliers to do this. Be careful not to lose the O-ring that is attached to the filter. This is what seals the connection and prevents leaks.
Step 3 Clean with warm water
Once the filter is removed, you can clean it with warm water and soap. Rinse it well and then screw it back into place. Make sure that the O-ring is in place and that it is seated properly.
Read Also: Do washing machines always have water in them? (Answered)
How to replace/change the whirlpool washing machine filter top loader
Replacing the Whirlpool washing machine filter top loader is a task that can be easily done by following these simple steps.
Step 1. Locate the filter. The filter is usually located near the top of the washing machine, on the back or side.
Step 2. Remove the old filter. To do this, simply unscrew it or release it from its housing.
Step 3. After that, insert the new filter. Make sure that it is inserted correctly and that it is screwed in or secured properly.
Step 4. Finally, turn on the washing machine and test it out.
Replacing the Whirlpool washing machine filter top loader is a quick and easy task that can be done in just a few minutes.
How to clean the filter on a whirlpool top load washer?
The Whirlpool washing machine filter top loader is designed to keep your clothes clean and free from debris.
However, over time this filter can become clogged and need to be cleaned.
Here are the steps you need to follow in cleaning the Whirlpool washing machine filter top loader:
Summary of how to clean whirlpool top load washer filter:
- Start by unplugging your washing machine from the power outlet.
- Locate your whirlpool washing machine filter.
- Remove the cover of your whirlpool washing machine filter top loader.
- Pull out the filter.
- Clear lint with a towel.
- Soak mesh screen.
- Check the filter hole for any debris.
- Fix the filter and cover back into your washer.
- (Final step) Test for leaks before doing your next laundry.
Step 1. Start by unplugging your washing machine from the power outlet.
It is important that your washer isn’t connected to any power source as well as ensure that it’s not in a place where water can get into contact with it.
When removing your filter, water might come out of the opening so make sure to get a rag on the floor near the opening to avoid spillages.
Step 2. Locate your whirlpool washing machine filter.
As mentioned already, your whirlpool washing machine filter can be located at the center of your agitator, or at the bottom depending on your washing machine model. Always check your whirlpool washing machine filter if you are unsure where to find the filter.
Step 3. Remove the cover of your whirlpool washing machine filter top loader.
Once you have located the filter, remove the cover. For most whirlpool washers you will have to turn the cover counter-clockwise to remove it, or even use a screw or pry to assist you to remove it.
Step 4. Pull out the filter.
Now that you have removed the cover of your filter, pull out the filter by turning counterclockwise and pulling simultaneously.
You would notice that there is wet lint, detergent, and other tiny materials stuck around your filter.
Step 5. Clear lint with a towel
Next, use a paper towel or a thin towel to clear out the lint deposited on the filter. You can also use a small brush if it proves difficult to remove.
Step 6. Soak mesh screen
Remove the mesh screen on the filter and soak it in warm water for a period of about 10 minutes.
You may not be able to remove the screen depending on your model. But this process will allow you to get rid of all lint that can’t be removed manually with a brush or towel.
Step 7. Check the filter hole for any debris.
Lower your washer a bit and check to see if there’s any lint debris stuck inside the filter hole and remove all of it.
Step 8. Fix the filter and cover it back into your washer.
Once you are certain that you have cleared your filter system of all lint and debris, fix them back into your washer.
Step 9. (Final step) Test for leaks before doing your next laundry
Run your washer empty and look out for any leaks on your washer. If you find any, then it means your filter hasn’t been fixed properly and you need to check and adjust it.
Whirlpool washing machines have inlet filters
The inlet filters on your Whirlpool washer are located on the water inlet valves behind your washer.
These filters screen out debris and particles that may be present in the water supply, such as dirt, sand, or rust, to prevent them from entering the washing machine and potentially causing damage.
The filters should be cleaned periodically to ensure they are functioning properly and to prevent clogging.
To clean the inlet filters, locate the water inlet valves on the back of the washing machine and gently remove the filters by twisting them counterclockwise. Rinse the filters thoroughly under running water and reinsert them back into the valves, making sure they are securely in place.
If the filters are damaged, then your need to replace them immediately.
How often should Whirlpool washing machine filter top loader be cleaned?
Whirlpool washing machines come with a lint filter to help keep the machine clean. The lint filter should be cleaned at least once every 6 months or occasionally after every load of laundry in order to maintain the optimal performance of the machine. This is according to a recommendation from Whirlpool.
A dirty filter can also be the reason why your Whirlpool washing machine is smelling.
More importantly, if you notice that the machine is not performing as well as it should, it is probably time to clean the filter.