30 Seconds Cleaner Ingredients (All You Need To Know)
Cleaning can be a tedious task, but using a cleaner can make it much easier and more efficient.
30 seconds cleaners, in particular, are known for their ability to quickly remove dirt and grime, making them a popular choice for many people.
But you may want to know what exactly these cleaners are made of, and whether are they safe to use.
30 seconds cleaner is made of the following ingredients: Sodium Hypochlorite, Sodium Ash, Surfactant, Corrosion inhibitor, and Non-hazardous ingredients.
We carried out thorough research and sought expert knowledge to provide accurate information on the ingredients in 30 seconds cleaner so you can rest assured.
30 SECONDS Outdoor Cleaner
Table of Contents
What does 30 seconds cleaner do?
30 SECONDS® cleaner is a versatile and biodegradable solution for cleaning outdoor surfaces.
It effectively removes unsightly algae, moss, mold, and mildew, leaving surfaces looking fresh and new.
Additionally, 30 seconds cleaner includes an anti-corrosion agent that helps protect against future damage.
Whether you need to clean your patio, deck, or siding, 30 SECONDS® Cleaner is a great choice for keeping your outdoor spaces looking their best.
Ingredients in 30 seconds cleaner
As popular as 30 seconds cleaner is, you may want to know what constitutes it so you can better know how to watch yourself.
Luckily, directions to use is found on the package so you should always ensure that you read the instructions before use.
We have thoroughly researched the various ingredients in 30 seconds cleaner and we will provide you with all the details.
Below are the ingredients in 30 seconds cleaner:
1. Sodium Hypochlorite
Percentage by weight (wt%): 1-5%
CAS Number: 7681-52-9
Sodium hypochlorite is a chemical compound often used as a cleaning agent or bleach. It is a clear, greenish-yellow liquid that has a strong, chlorine-like odor.
It is commonly used in household cleaners, laundry detergents, and disinfectants to kill germs and remove stains.
Sodium hypochlorite is highly effective at killing bacteria and viruses, making it a popular choice for use in hospitals and other settings where cleanliness is of the utmost importance.
However, it can be irritating to the skin and eyes, so it is important to use 30 seconds cleaner with caution.
2. Sodium Carbonate
Percentage by weight (wt%): 1-2%
CAS Number: 497-19-8
Sodium bicarbonate is a white, powdery substance that is commonly used as a cleaning agent due to its mild abrasive properties and ability to neutralize odors.
It is often used to remove stains and make surfaces shine, and it is safe for use on a wide variety of surfaces including porcelain, glass, and metal.
Sodium bicarbonate is also a common ingredient in many types of toothpaste and deodorants, and it is often used in cooking as a leavening agent.
3. Surfactant
Percentage by weight (wt%): 1-2%
CAS Number: Proprietary
Surfactant is a type of chemical substance that is commonly used in cleaning agents to help remove dirt and grime from surfaces. Surfactants work by lowering the surface tension of water, which allows it to penetrate more easily and lift away dirt and debris.
They are used in a variety of cleaning products, including laundry detergents, dishwashing liquids, and all-purpose cleaners.
Surfactants are often classified based on their charge, with anionic surfactants having a negative charge, cationic surfactants having a positive charge, and nonionic surfactants having no charge.
We didn’t find The specific type of surfactant used in 30 seconds cleaner.
4. Corrosion inhibitor
Percentage by weight (wt%): 0.5-1%
CAS Number: Proprietary
A corrosion inhibitor is a type of chemical compound that is used to protect metal surfaces from corrosion, or the process of deterioration that occurs when metal is exposed to water, air, or other substances that can cause it to break down and weaken over time.
Corrosion inhibitors are often used in cleaning agents to help protect metal surfaces from damage during the cleaning process.
They work by forming a protective barrier on the surface of the metal, which helps to prevent the corrosive substances from coming into contact with the metal.
Corrosion inhibitors are commonly used in a variety of cleaning products, including those designed for use on metal surfaces such as appliances, tools, and automobiles.
They are also used in industries such as oil and gas production, where corrosion can be a significant problem due to the presence of corrosive substances in the environment.
5. Non-hazardous ingredients
Percentage by weight (wt%): To balance
Non-hazardous ingredients are those that are not toxic or harmful to humans or the environment.
These ingredients are often used in cleaners to provide additional cleaning power, improve the texture or consistency of the product, or add a pleasant scent.
Some common non-hazardous ingredients that may be found in cleaners include water, surfactants, fragrances, and enzymes.
Expo Whiteboard Cleaner
Hazards Classification of 30 seconds cleaner
Hazard classification is the process of identifying and evaluating the potential hazards associated with a product, process, or activity.
It is an important step in risk assessment and risk management, as it helps to identify the risks that need to be addressed and to prioritize actions to mitigate those risks.
The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) is a widely used system for classifying and labeling chemicals based on their physical, health, and environmental hazards.
The GHS uses standardized hazard pictograms, hazard statements, and precautionary statements to help users understand the potential risks associated with a chemical and to take appropriate precautions when handling it.
The tables below show all the Hazard classifications of 30 seconds cleaner:
Emergency Overview of 30 Seconds cleaner
Color: Light Yellow
Odor: Bleach Odour
Major Health Hazards: Contact with skin may result in irritation. Contact with the eyes may result in serious eye damage.
| HSNO Classification | Hazard Code | Hazard Statement | GHS Hazard category |
| 6.3A | H315 | Causes skin irritation | Skin corrosion/irritation – Category 2 |
| 8.3A | H318 | Causes serious eye damage | Serious eye damage/eye irritation -Category 1 |
| 9.1B | H402 | Toxic to aquatic life | Aquatic toxicity (Acute) – Category 2 |
| Prevention code | Prevention statement |
| P102 | Keep out of reach of children. |
| P103 | Read the label before use. |
| P104 | Read the safety data sheet before use |
| P264 | Wash hands thoroughly after handling. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective clothing. |
| Response Code | Response Statement |
| P101 | If medical advice is needed, have product container or label at hand. |
| P310 | Immediately call a POISON CENTER or doctor/physician. |
| P362 | Take off contaminated clothing and wash before re-use. |
| P391 | Collect spillage. |
| P302 + P352 | IF ON SKIN: Wash with plenty of soap and water. |
| P305 + P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, and easy to do. Continue rinsing. |
| P332 + P313 | If skin irritation occurs: Get medical advice/ attention. |
| Disposal Code | Disposal Statement |
| P501 | Dispose of as per Local Regulations. |
Read also: Does Hydrogen Peroxide Bleach Clothes? (Important Things You Need To Know )
First Aid measures
Recommended first aid facilities:
Running water and an accessible eyewash station must be readily available. In the event of an emergency, a shower, hand wash station, and soap must also be easily accessible.
| Exposure routes | |
| If in Eyes | Rinse for at least 15 minutes lifting eyelids. Remove contact lenses, if present, and easy to do. Continue rinsing. Seek medical assistance if needed. |
| If on Skin | Wash skin with soap and water. Take off contaminated clothing and wash it before reuse. Seek medical assistance if needed. |
| If Swallowed | Never give liquid to a person showing signs of reduced awareness or becoming unconscious. Seek medical assistance if needed or contact the poisons information Centre |
| If Inhaled | Move the patient to fresh air. If breathing becomes difficult get medical attention. |
| Major Spills | – Wear protective equipment to prevent skin and eye exposure. – Prevent by whatever means possible any spillage from entering drains, sewers, or water courses. (If this occurs contact your regional council immediately). – Use absorbent (soil, sand, or other inert material). Rags are not recommended for the clean-up of spills, as they may create fire or environmental hazards. – Collect and seal in properly labeled containers or drums for disposal. If contamination of crops, sewers, or waterways has occurred advise local emergency services. – Mop up and collect recoverable material into labeled containers for recycling or salvage. – Recycle containers wherever possible. This material may be suitable for an approved landfill. Dispose of only in accordance with all regulations. |
Precautions for safe handling and storage of bulk quantities of 30 seconds cleaners:
- Keep out of reach of children.
- Read the label before use.
- Wear protective clothing.
- Avoid breathing in vapor, mist, or spray.
- Wash hands thoroughly after handling.
- Avoid release to the environment
- Avoid contaminating waterways. Do not discharge the product into drains or sewers.
- Protect from light and check regularly for spills & leaks.
Expo Whiteboard Cleaner
Frequently Asked Questions
Is 30 second cleaner just bleach?
30 Seconds Outdoor Cleaner is a powerful cleaner that does not contain regular household bleach, but rather uses a sodium-hypochlorite formula that is effective at removing stains caused by algae, mold, and mildew.
It is designed to quickly and effectively remove stains from outdoor surfaces such as concrete, wood, brick, and more.
This formula is safe to use around lawns and landscaping, and breaks down into the soil once rinsed away. It is biodegradable and does not contain any harmful chemicals.
Can you put 30 second cleaner in a pressure washer?
It is generally not recommended to use 30 Seconds Outdoor Cleaner in a pressure washer because the cleaner needs to remain on the surface for a period of time in order to effectively loosen and remove dirt and grime.
For best results, it is recommended to apply the cleaner to the surface, allow it to sit for a few minutes, and then rinse it off with a hose.
This will allow the cleaner to penetrate and soften the dirt and grime, making it easier to remove.
Is 30 second cleaner safe for pets?
It is always best to keep pets away from areas that are being cleaned with 30 Seconds Cleaner to ensure their safety. If it is not possible to remove pets from the area, it is important to rinse the cleaned surface thoroughly to remove any traces of the cleaner, as pets may try to lick or chew on the surface.
`If a pet comes into contact with the cleaner, it is recommended to rinse them off thoroughly to remove any residue.
Once the cleaned surface has been rinsed and is dry, it should be safe for pets to be in the area.`If a pet comes into contact with the cleaner, it is recommended to rinse them off thoroughly to remove any residue.
Can you use 30 second outdoor cleaner indoors?
30 Seconds Outdoor Cleaner is primarily for use on outdoor surfaces such as concrete, wood, brick, and stone. In you want to use it indoors, you should use 30 seconds indoor cleaner instead.
Is 30 second cleaner toxic?
30 SECONDS Cleaner is designed to be safe for the environment and is not toxic. Its chemical composition breaks down quickly when diluted with water or exposed to sunlight, and it does not leave any harmful toxins or chemicals behind.
This makes it a good choice for those who are concerned about the impact of their cleaning products on the environment.
It is important to always read and follow the instructions on the label of the cleaner, and to use proper caution.
