Roper Washing Machine won’t Spin (All you Need to Know)
One of the most frustrating things to experience when using your Roper washing machine is for it to not spin after a wash cycle.
Sometimes it may even spin and your clothes will still come out wet.
Many Roper washing machine users sometimes experience this and it always leaves you confused and worried not knowing why your Roper washer isn’t spinning.
So the question you will ask is, ”Why is my Roper washing machine not spinning?”
Most times, it’s simply due to not properly setting your Roper washer or unevenly loading your washer, or other times, a fault.
Here is why your Roper washing machine is not spinning:
If your Roper washing machine is not spinning, it may be due to one of these common reasons.
- The load is too small or unbalanced
- Your spin has been turned off or low speed
- Too much detergent
- The washing machine isn’t leveled.
- Your lid switch is broken
- The pump did not empty at the allocated time
- Your drain pump motor may be faulty
- Your drive belt may be broken
- Power may have been cut from your washer
In this article, we will explain the common reasons why your Roper washing machine isn’t spinning and provide easy tips to get your machine spinning with no hustle.
Table of Contents
Why is my Roper washing machine not spinning?
It’s a frustrating experience when your Roper washing machine isn’t spinning.
You may not know what is wrong, or how to fix it.
But today you are in luck.
Here are some possible reasons why your Roper washing machine isn’t spinning, and what you can do about them.
1. Power may have been cut from your washer
This may seem very basic but it can easily catch you off guard.
Maybe you were doing laundry and you didn’t realize the time a power cut occurred.
Then you start a spin cycle and realize it does spin after several attempts.
Troubleshooting Tips
It always doesn’t hurt to check if your washer is still connected to power.
So If your washing machine is not spinning, the first thing to check is the power supply.
Make sure that the washing machine is plugged in and that the power switch is turned on.
If the power is off, turn it on and see if the washing machine starts spinning.
2. The Load is too small or unbalanced
If a load of laundry in the washing machine is unbalanced, it can cause the machine to vibrate excessively and even stop spinning.
For your Roper washer to work at its best you always need to ensure that the clothes inside the tub are evenly balanced before you start a spin cycle.
Roper washing machine has an inbuilt safety sensor that does the work for you by carefully distributing your clothes all over the surface of the tub.
This ensures that you always have a quiet and smooth spin.
If the load is too small, for instance, you have only a comforter in the TUB, and the sensor is not able to evenly distribute the clothes in the tub.
It detects the load as unbalanced and it won’t start a spin cycle.
Troubleshooting Tips
Always wash your clothes in bulk and put extra effort to balance your clothes. Don’t was only heavy items.
Combine them with small items so your washer can evenly distribute the load for a successful spin.
Read Also: Roper Washing Machine Stuck on Sensing Fill? (All you Need Know)
3. Your spin has been turned off
Unless your Roper washing machine is a very old model, your washer will most likely have an option button that allows you to choose the spin speed you want.
The speed is shown on the digital display on your washer.
By pressing this button, your washing machine’s spin speed can be turned to the maximum or it can be turned off (”no spin”) and you will have your clothes coming out still wet.
Troubleshooting Tips
You can reactivate the spin cycle by pressing the button until you reach your desired spin speed.
The spin speed can be changed without you having to pause your washer.
As a safety precaution and to prevent fabric damage, there is a maximum allowed speed that you can’t exceed.
4. Your lid switch is broken
When the lid switch is Not working properly, it will prevent your washer from spinning.
It is a safety feature on most Roper washing machine models that prevents your clothes from spinning if the lid is not closed properly.
This problem is common in top load washers.
if your top load washer isn’t spinning, then it may be a problem with your lid switch.
To allow for high spin speed, anytime you are coming to spin, the door will lock and the lid lock light will turn on.
If the light is off it means your washer isn’t locked, and no spin cycle will start.
Troubleshooting Tips
Locate the lid switch underneath the lid on top of your washer.
Check to see if is bent or makes good contact.
If it is bent, try ad see if you can bed it back into shape.
Otherwise, you will need to replace it.
5. Your drain pump motor may be faulty
The carbon brushes in your pump motor could have worn out and gotten so bad that the motor will not rotate.
Your faulty pump may be the reason why your Roper washing machine sometimes spin and other time doesn’t spin.
You may have to replace these brushes if they have become non-functional.
It’s a bit technical so you may want to call in your appliance technician to assist you.
6. The washer isn’t level
If the washing machine isn’t level, it can vibrate excessively and even stop spinning.
Use a level to check the machine and make adjustments as needed.
7. The drive belt is broken
Another thing you can do is to check the drive belt.
This is the belt that connects the motor to the spin tub.
If this belt is loose or broken, then it will need to be replaced.
8. The pump did not empty at the allocated time
One of the reasons why your Roper washing machine is not spinning could be that the pump did not empty at the allocated time.
Your Roper washer will not spin if it senses that there is still water in your tub.
So make sure your washer is properly drained before you run a spin cycle.
Check and make sure that your drains are not clogged or there isn’t any foreign material causing your washer not to drain.
Read also: Can a Washing Machine Drain into a Floor Drain? (Answered)
Why does my Roper washing machine not spin fast?
Your Roper washing machine comes with a system that protects your washer and clothes from damage if the load is not balanced before spinning.
As a result,
- The washer tries to balance the load, increasing the spin time.
- Reduces the speed of spin to decrease excessive vibration and noise.
- The spin cycle does not start to protect the washer and load.
These are the reasons why your Roper washing machine is not spinning at full speed.
If you experience that your washer doesn’t spin as required, remove the load, detangle it, reload it, and restart the spin program.
Too much detergent can cause suds and can also slow down the spin speed. Ensure that you use the right amount of detergent in your laundry. To remove extra suds, select Rinse & without adding detergent.
Conclusion
We hope that this article has provided you with all the information you need to troubleshoot and fix your Roper washing machine when it’s not spinning.
Always remember to check the load size and balance, as well as the spin setting, before assuming there is a more serious issue at hand.
If you are still having problems, try out all tips, and don’t hesitate to contact your technician assistance.
Reference:
Roper washing machine user guide
