Hotpoint Washing Machine Control Panel Not Working? (How To Fix)
A Hotpoint control panel is a crucial component of your Beko washer, allowing you to adjust settings, monitor temperatures, and choose different wash functions.
However, there are several issues that can go wrong with the control panel, such as unresponsive touchpads, faulty displays, or power supply problems.
If your washing machine control panel is not working, don’t panic, we will help you fix it in this blog post.
Here is why your Hotpoint washing control panel is not working:
There could be various reasons why your Hotpoint control panel is not working. These include power supply issues, a faulty touchpad, a damaged display board, electrical surges, or an enabled control lock.
Quick fixes to try:
- Soft reset your washer
- Check power supply
- Check touchpad functionality
- Check if the child lock is active
In this blog post, we’ll guide you through some solutions to help fix your Hotpoint washing machine control panel issue, so you can get your washer working smoothly again.
Hotpoint washing machine control panel not working? (Try these fixes)
If you’re experiencing issues with your Hotpoint control panel, you may be able to fix the problem yourself.
While it’s possible that your control panel has gone bad, it’s usually possible to solve the problem by checking a few stuff.
Here are 4 things you can do to try to fix get your washer control panel responding:
1. Soft reset your washer
When your Hotpoint control panel is not working, the first and easiest step to try is to soft reset it.
This simple process fixes control panel issues in many instances.
To reset your washer, unplug it from the power source. After disconnecting the washer, wait for 10 to 15 minutes before plugging it back in. This will give the control board time to reset and may solve the problem.
Once you have waited a few minutes, plug the appliance back into the power source and try to use the control panel again.
If the control panel starts working again, then the problem was likely a minor glitch that was resolved by resetting the washer.
However, if the control panel is still not working, then you will need to move on to the next step in troubleshooting the issue.
2. Check the power supply
If your Hotpoint control panel is still not working after attempting a soft reset, the next thing to check is the power supply.
A faulty power supply can cause a variety of issues with your washer, including control panel problems.
The first thing to check is that the washer is properly plugged into the outlet.
Ensure that the plug is inserted all the way into the socket and that the socket is functioning correctly.
You can test the outlet by plugging in a different appliance or device to see if it works. If the outlet is not working, that may be the problem and you’ll need to replace it or call a qualified electrician to repair it.
Another thing to consider is the power cord itself. Check the power cord for signs of damage, such as frayed or cut wires.
If everything looks good with the power cord and outlet, try plugging the washer into a different outlet to see if this resolves the issue.
The original outlet may have been the problem If the control panel starts working with a different outlet.
3. Check the Touchpad functionality
If the power supply is not the issue, the next try in fixing a Hotpoint control panel that is not working is to verify the touchpad’s functionality.
Start by inspecting the touchpad for any signs of damage or wear and tear.
If you notice any cracks, dents, or other visible damage, this may be the cause of the problem.
If this is the case, you will need to replace the touchpad or the entire control panel.
If there is no visible damage, the issue may be related to debris or moisture on the touchpad.
Clean the touchpad with a soft cloth and gentle cleaning solution to remove any dirt or grime that may be affecting its functionality.
Be sure to avoid using harsh chemicals or abrasive materials that could scratch or damage the touchpad.
Another way to verify the touchpad’s functionality is to check for any error codes or messages on the control panel.
Some Hotpoint washers have a diagnostic mode that will display error codes or messages when there is an issue with the touchpad or another component.
You can check your user manual to enter the diagnostic mode for your specific appliance model.
4. Check if the child lock is active
Hotpoint washers often have a control lock feature that prevents the control panel from working and being responsive when turned on.
This feature is designed to prevent children or other users from accidentally or intentionally adjusting the wash settings.
If your Hotpoint control panel is not working, it is essential to check if the control lock feature is active.
To do this, look for a control lock symbol (closed padlock) on the control panel. If the control lock feature is active, you will simply need to disable it.
Press and hold the control lock for a few seconds until the control panel lights turn off or an indicator light turns off.
How to reset Hotpoint washing machine
There is no reset button on Hotpoint washing machine. However, you can reset your washer using steps, such as unplugging the appliance or holding down a combination of buttons on the control panel.
The process for resetting a Hotpoint washing machine can vary depending on the model and age of the appliance.
In general, the following steps may be used to reset a Hotpoint washing machine:
- Unplug the washer from the power supply outlet for 1 minute
- Plug the washer back and raise and lower the lid 6 times within 12 seconds. The lid must be raised a minimum of 2 inches to ensure the magnetic connection holding the lid is interrupted and lowered completely each time.
- This action will reset your Hotpoint washer
You may also like:
Thank you for this!! I followed these steps and was able to reset my washer with ease. I’d given up hope and just knew I was going to have to order a $250 control board to repair it, luckily I found this and it fixed my issue!!