Why is My Hoover Washing Machine Beeping? (Solved)

When your hoover washing machine starts beeping, it can be frustrating and confusing.

Your hoover washing machine is beeping but probably still washes and spins as it should.

You even switch off your washing machine and it still keeps beeping.

The worst part is that sometimes, no error codes are displayed for you to even have an idea why your washer keeps beeping.

You are not alone!

Many hoover washing machine users face this rather annoying problem. Especially if you have used your hoover washer for a little over a year.

These are the possible reasons why your hoover washing machine keeps beeping:

Your hoover washing machine needs an auto clean
There is moisture in your program selector
Your washer needs to be descaled
The lint filter is full
Your washer is unbalanced
There is a fault with your washing machine

It’s important to know what the different beeping noises mean so that you can troubleshoot the problem.

In this article, we are going to show you all the possible reasons why your hoover washing machine is beeping.

We will also provide step-by-step troubleshooting tips you can follow right now to stop your washer from beeping

Table of Contents

11 possible reasons why your hoover washer is making beeping (Plus solution).

There is always a reason behind your hoover washing machine’s beeping. Sometimes it’s easy to identify the reason.

Such as your hoover washing machine door is not properly closed or when you overload your washer.

Other times you can’t just figure out the reason why your washer is beeping.

Here are 10 possible reasons why your hoover washing machine is beeping.

1. Your hoover washing machine needs an auto clean.

Few people know that a hoover washing machine needs an auto-clean from time to time, called a maintenance wash.

This is because it helps to clean the inside of the washer and get rid of any dirt or build-up that may have occurred over time.

Your hoover washer may enter an unstopping beeping mode just to alert you to auto clean it.

This solution works for most people whose hoover washing machine won’t just stop beeping.

The steps to do an auto-clean on a hoover washing machine are as follows:

How to run an auto-clean cycle on a hoover washing machine

1. First, you need to unplug the washing machine from the power outlet.

2. Next, you need to remove all of the clothes and any other items from inside the washer.

3. Once everything has been removed, you should then add 1 cup of white vinegar to the water that is already inside the washing machine.

Alternatively, you can add 10% detergent of the quantity specified in your user guide for lightly soiled clothes.

4. After adding the vinegar or detergent, you need to run the washer on the hottest (60 degrees on the hoover washing machine) and longest cycle. Usually, your hoover washer will run for about 70 minutes

5. Once the cycle is finished, you should leave the washing machine door open so that it can air out and dry completely.

You may notice that your hoover washing machine starts beeping after completing an auto clean.

This is normal and is simply your hoover washing machine’s way of letting you know that it is finished and ready to be used again.

It is recommended that you run an auto-clean at least after every 40 wash cycles.

2. Moisture in your hoover washer Program Selector

Another possible reason why your hoover washing machine constantly beeping is that the program selector has come into contact with a significant amount of moisture.

When the program selector gets damp by coming into contact with moisture, the chosen resistance alters and your washer thinks you are repeatedly changing the program selection. So it continues to beep.

This usually is the problem when your washing machine is kept in a space that is highly humid or moist. Or your washer has been beaten by rain, somehow.

How to fix a damp program selector

Turn off the power supply to your hoover washing machine
Take off the top cover by unscrewing the bolts that can be located on the top and the back of your washer. After removing the bolts, Slide the top cover backward and lift it up.
Look behind where the dial is, and you will see the circuit board held tight by 4 clips. Remove clips to release the circuit board.
Turn the board over to access the copper contacts.
Clean or wipe it using alcohol because alcohol doesn’t conduct electricity. Water or detergent conducts electricity and should not be used for cleaning.
Look behind the dial and wipe the 3 or copper fingers that make contact with the circuit board when it’s in place. Gently wipe it in other not to break any of it.
Clip back the circuit board in the exact position you unclipped it from.
Turn on your washer to ensure everything works well.
Your hoover washing should stop the constant beeping

There are some beeps on your hoover washing machine that are not persistent and are due to one minor issue or another.

Below are some of the reasons your hoover washing machine beeps occasionally.

3. The water level is too low.

If the water level in your washing machine is too low, the machine will beep to alert you. This can happen if you forget to add laundry detergent or fabric softener, or if there are leaks in the hoses or connections.

4. The door is not closed correctly.

If the door of your hoover washing machine is not properly closed, the machine will beep to let you know. Make sure that the door is shut tightly before starting a cycle.

5. There is a fault with the machine.

If there is a problem with your hoover washing machine, it will usually display an error code on the control panel. If you see an error code, refer to the owner’s manual for troubleshooting instructions.

6. The machine needs to be descaled.

If your hoover washing machine has a built-in water softener, it will need to be descaled from time to time. Descaling removes mineral deposits from the water softener and is typically done with a commercial descaling solution.

7. The lint filter is full.

The lint filter traps lint and debris from your clothes. If the lint filter is full, it can cause your hoover washing machine to beep. Remove the lint filter and clean it with soap and water.

8. The wash cycle is complete.

When the wash cycle is complete, your hoover washing machine will beep to let you know. You can then move your clothes to the dryer or hang them up to air dry.

9. The machine is unbalanced.

If your hoover washing machine is unbalanced, it will beep to let you know. The machine may become unbalanced if too much laundry is added, or if the load is not evenly distributed. To fix an unbalanced load, redistribute the laundry and restart the cycle.

10. The machine is overloaded.

If your hoover washing machine is overloaded, it will beep and the wash cycle will stop. Remove some of the laundries from the machine and restart the cycle.

11. The detergent dispenser is empty.

If your hoover washing machine is equipped with a detergent dispenser, it will need to be refilled from time to time. Add more detergent to the dispenser and restart the cycle.

Final Thoughts

As revealed, the main reason why your hoover washing machine keeps beeping is due to your washer needing an auto wash and the program selector being dampened by moisture.

Although there are many more reasons why your washing machine is beeping as discussed in this article.

By running all these troubleshooting methods explained, you will be able to finally stop that annoying beeping noise from your hoover washing machine.

Feel free to leave your comment below.

Why is My Hoover Washing Machine Beeping? (Solved)

11 possible reasons why your hoover washer is making beeping (Plus solution).

1. Your hoover washing machine needs an auto clean.